Showing 1 - 12 of 21 results
AirLectric Foot Switch (Alternate)
If you've installed backlighting on your screen print washout sink and are tired of having to reach around the sink to operate a light switch, try Blackline's AirLectric footswitch. It easily activates most 110V external plug lights. Just plug the light cord into the footswitch's adapter, step on the air switch, and that's it! It's inexpensive, easy to use and leaves your hands free for cleaning. This is the 'Alternate' foot switch, meaning that is activates the plugged in device once upon being stepped on. For example, step on the foot switch once and it turns the light on, step on it again and the light is turned off. This is opposed to the 'Momentary' switch, which requires the user to keep the foot switch depressed in order to keep the appliance on.
AirLectric Foot Switch (Momentary)
Blackline's AirLectric footswitch (Momentary) makes hands free pump actuation easy. For Blackline products like the D2 and DS, which require the operator to activate the pump to cycle fluid through the spray nozzle, the momentary makes this a simple operation. Just plug the pump chord into the footswitch's adapter, step on the air switch, and that's it! It's inexpensive, easy to use and leaves your hands free for cleaning. This is the 'Momentary' foot switch, meaning that the operator must keep the foot switch depressed in order to activate the plugged in device. If you're looking for a foot switch that is a press-on, press-off, you'll need to order the AirLectric Alternate switch here.
D2 Ink Removal Station
PLEASE NOTE: OUR CURRENT LEAD TIME FOR THIS ITEM IS APPROXIMATELY THREE WEEKS FROM DATE OF ORDER TO SHIP. THANK YOU. Blackline Manufacturing’s D2 Ink Removal Station recirculates aqueous-based, biodegradable solvents used when cleaning ink off of screens, squeegees and other printing tools. Able to ship UPS, the D2 is a two-piece design that is compact and easy to use. The D2 is durable and easy to assemble, service and maintain. Dual internal tanks isolate and trap ink sludge and separate it from the solvent, which is then filtered back into the system using a footswitch-driven pump. This allows your biodegradable cleaners to be recirculated and re-used in a system that requires no external plumbing. With aqueous based solvents, the 20-plus gallon tank can be filled completely with water, using a spray bottle to apply cleaners. Or the tank can be charged with a chemical/water mix, eliminating the need to...
ELS Screen Print Table Top Washout Sink
Blackline Mfg.’s ELS is a small, lightweight and inexpensive booth that sits on a table or counter top and holds up to a 24” x 24” standard screen. A perforated drain and 3/4” fitting on the bottom of the ELS allow easy hook-up for the supplied drain hose, which can be routed to the container or filter of your choice. Now even the smallest shop or home studio has the ability to use a professional, well-built washout sink to help streamline workflow and improve efficiency. Product Specifications: Copolymer construction Perforated, ¾” drain - hose included Drop-in screen support
Filter One Classic Blue Filter Mat
Note: This product is for the Filter One Classic (white in color). The Blackline Mfg. blue mat catches large pieces of tape, ink and emulsion that fall from the drain of your washout booth, so that they don't enter the Filter One's catch-tank. This helps extend the useful life of the polypropylene filters found in the unit's twin blue canisters.
Filter One HP Blue Filter Mat
Note: This product is for the Filter One HP (black in color). The Blackline Mfg. blue mat catches large pieces of tape, ink and emulsion that fall from the drain of your washout booth, so that they don't enter the Filter One HP's catch-tank. This helps extend the useful life of the polypropylene filters found in the unit's twin blue canisters.
Filter One HP Screen Print Sink Filter
IMPORTANT NOTES BEFORE BUYING A FILTER ONE HP The Filter One HP can only be used with aqueous-based, biodegradable non-toxic chemical solvents. If the Filter One HP is to be used to filter photopolymer emulsion, Blackline Mfg. strongly recommends using a solvent that contains a surfactant. This will help break down the photopolymer. Without the use of a surfactant, it may be necessary to change the filters on the Filter One HP several times per week. The Filter One HP is an under-sink filtration system that utilizes a dual-tank design to trap ink and emulsion solids before they reach the outflow. It connects to your plumbing, and when used with biodegradable, non-toxic cleaners, discharge from the system is drain-safe. It's extremely easy to operate and fits under any of Blackline Mfg.’s washout booths, making it a cost effective waste management system. Features: Self-priming high-pressure pump Keeps ink and emulsion...
KD-XL Screen Print Washout Sink
The KD-XL is the big brother of the KDL, and employs the same innovative multi-part system that allows them both to be disassembled and shipped via UPS ground in one box. With an extra four inches in width and five inches in height, the KD-XL provides additional room for standard 23” x 31” screens. And like the KDL, the KD-XL is made of durable, chemically resistant 1/4"-inch natural poly and features built-in screen Washoutsupports and a perforated drain. The KD-XL is an excellent addition to any clean-room. Price includes crating fee!Measures 36”W x 24”L x 69”HKD-XL Standard Features Welded sink pan with sloped floor for fluid drainage Locking side and back panels Built-in screen supports 1/4-inch natural polypro construction Easy to backlight Easy to assemble Bolt on legs Ships regular UPS ground
KDL Screen Print Washout Sink
Blackline’s KDL is the original UPS-shippable screen print washout sink. Full size and made of 1/4-inch, semi-transparent natural polypropylene, the KDL is strong, durable and built to give you years of service. It can hold a standard 23” x 31” screen and comes standard with two screen supports. And because the KDL is semi-transparent, backlighting can be added if so desired. If you’re looking for an entry-level washout sink that will grow with your business and save you on freight costs, Blackline’s KD series of sinks are the perfect fit. Measures 32”W x 24”L x 64”H KDL Standard Features Welded main pan Locking side and back panels Built-in screen supports 1/4-inch natural polypro construction Ships UPS ground